White and black eFoil with an ocean background

Explaining the Lift 55mm and 68mm Propulsion Systems

An eFoil looks simple from above the water: a board, a mast, a wing, and a hand controller. But beneath the surface, every part of the system has a specific job.

The propulsion system is what gets the board moving. It creates the thrust the foil needs to lift, then stays quiet and controlled once you are flying. Lift's 55mm propulsion system was designed for riders who want efficient power on the way up and minimal drag once it's time to glide, while the 68mm system provides extra power for larger riders or those who want to cruise flat water on the LIFT5. On the LIFTX, the 55mm option results in a system that transitions naturally between powered eFoiling and unpowered surf foiling without changing the way the board feels.

This article explains how a Lift eFoil works, the differences between the 55mm and 68mm propulsion systems, and how they fit into the rest of the board. 

Key Takeaways

  • An eFoil is a battery-powered watercraft that uses an electric motor, a propeller, a hydrofoil wing, and a hand controller to lift the board above the water and fly silently.
  • The motor provides thrust, while the hydrofoil wing creates lift. The rider controls the thrust (and, by extension, the speed) with a wireless remote and controls height by shifting their weight.
  • Lift Foils' 55mm and 68mm propulsion systems include a direct-drive motor, which means there is no gearbox or mechanical noise, just pure power delivered straight to the propeller.
  • The folding prop on the LIFTX 55mm system collapses when you release the throttle, dramatically reducing drag during glide and unpowered foiling.
  • The integrated nose cone unifies the motor, mast, and nose into one hydrodynamic system, cutting drag compared to traditional bolt-on motor pod designs.
  • The 55mm and 68mm systems are compatible with both LIFT5 and LIFTX boards, both of which communicate with the propulsion systems and adjust output depending on what system is being used.
  • The 55mm propulsion is available in both high-mount and low-mount configurations, allowing riders to prioritize either cleaner glide in the surf or more consistent powered performance.
  • The Gen5 Battery on the LIFT5 delivers 2.2 kWh of electric power and up to 90 minutes of powered ride time. Meanwhile, the 1.0 kWh battery on the LIFTX offers up to 45 minutes of powered ride time. Both feature a wireless connection and one-button start.

What Is an eFoil?

An eFoil is an electric watercraft with a motor-driven hydrofoil system mounted beneath the board. When riders apply power, the electric motor spins a propeller that drives the board forward. As speed builds, the hydrofoil wing beneath the board creates lift and the whole setup rises out of the water. Riders fly above the surface, supported entirely by the foil, with nothing touching the water except the mast and wings below.

Riding an eFoil is unlike any other board sport. There is no paddling and no need for a jet ski to tow riders. They don’t even have to ride waves to achieve lift, although the LIFTX is a high-performance eFoil built specifically for ripping waves. The electric power source makes the rider entirely self-sufficient, which means they can ride on flat water (like in a lake), in the open ocean, or anywhere they have enough room to take off. It is quieter than a jet ski, more portable than a boat, and more accessible than traditional foil surfboard disciplines that require waves or wind.

The propulsion system plays a big role in how that experience feels. Traditional electric drive systems add drag and mechanical noise, but Lift’s propulsion system was designed to minimize both through the use of direct drive technology. With this tech, the propeller is connected directly to the motor, which cuts the noise and vibration normally created by a gear box. This results in a quieter, smoother, and more natural feel when under power and gliding on swell, the hallmark of Lift’s patented Quiet Ride Technology

Lift Foils invented the original eFoil in 2015, and launched commercially in 2018. Everything we build draws on over 15 years of hydrofoil design, informed by the people who ride these boards every day.

How the 55mm and 68mm Propulsion Systems Fit into an eFoil

An eFoil up close

The Board

The board floats on the water at rest and serves as the platform riders stand on. It houses the battery, eBox, and connects to the mast below. Lift eFoil boards are built with carbon fiber or fiberglass (depending on the model), and their volume determines how easily they float and how forgiving they are during take-off. More volume means more stability and a more forgiving learning curve, but also more swing weight once up on foil.

Once the hydrofoil creates enough lift to raise the board clear of the water, the board itself stops creating meaningful drag. From that point on, the foil beneath the surface is doing almost all of the work.

The Hydrofoil Wing

The hydrofoil wing system sits beneath the board, attached to the mast. It consists of a front wing, a rear stabilizer wing, and a fuselage connecting them. As the board moves forward, the wing generates lift that raises the board out of the water.

The size and shape of the front wing determine how fast a rider needs to travel before takeoff, how stable the ride feels, and how the setup performs. Larger wings with more surface area generate lift at lower speeds, making takeoff easier. High-aspect wings with a long, narrow profile maximize efficiency and glide at speed. The rear wing controls pitch stability, managing the nose-up and nose-down motion as speed changes.

It is important to understand that the foil cannot generate lift until it reaches the right speed. That's the propulsion system's job, and it's where Lift's 55mm and 68mm options set the brand apart.

Lift’s 68mm Propulsion System

The 68mm propulsion system comes stock on the LIFT5 F and LIFT5 models. This system provides maximum thrust, supporting larger riders, heavier setups, and easier initial lift. The propulsion system includes the mast and motor, with the motor nosecone integrated directly into the mast to reduce drag and improve glide and ride efficiency. The 68mm propulsion system comes with the enclosed LCS Jet propeller, which provides ample thrust while reducing risk related to an exposed propeller. However, because Lift eFoils are based on the Lift Connect System (LCS), foldable props can be swapped in to create a smoother ride that’s more conducive to powered/unpowered riding. This is particularly useful on the 4'4 LIFT5, which can be tweaked for high-performance foiling similar to the LIFTX.

The 68mm propulsion system is designed for powered riding on the LIFT5 F and LIFT5 eFoils in flat water venues such as lakes and the open ocean. However, it can also be used on the LIFTX for riders who desire more power. When the 68mm propulsion system is installed on the LIFTX, a sonar-powered system in the board’s eBox sends an electric chirp to the propulsion system, where a digital “handshake” identifies what system is being used. The eBox then calibrates the power output to match the 68mm motor.

The 55mm Propulsion System

LIFTX eFoils come stock with the 55mm propulsion system, providing a lighter-weight, streamlined power source that facilitates the powered/unpowered riding the board is built for. The 55mm refers to the diameter of the direct drive motor used in the LIFTX propulsion system, which provides the same Quiet Ride experience as all Lift eFoils.

Rather than being mounted in a pod bolted to the front of the mast, the motor is integrated directly into the mast itself. The integrated nosecone unifies the entire propulsion unit into a single hydrodynamic shape. This eliminates the external pod found on older designs, reducing drag while improving efficiency and durability. The result is a cleaner path through the water and a propulsion system that feels like part of the foil rather than an attachment.

High-Mount vs. Low-Mount Configurations

With the 55mm motor, Lift gives riders yet another way to fine tune how the system behaves. The 55mm propulsion is available in both high-mount and low-mount configurations.

The low-mount setup positions the motor closer to the foil wing, providing a familiar eFoil feel and consistent powered performance for longer sessions. The high-mount setup moves the motor closer to the board, reducing drag once riders cut the throttle and begin riding high on the mast for unpowered performance. Riders who spend more time surfing swells, pumping, or generally riding unpowered often prefer this configuration because it keeps the prop farther away from the wing during glide.

The high-mount 55mm propulsion unit has been compared to foil assist products, and it is true that the setup is similar. That being said, the LIFTX with 55mm high-mount prop is still an eFoil, which means far more power than any foil assist setup can provide. This means easier access to remote lineups and a more efficient approach when catching waves.

The LCS Folding Glide Propeller

The 55mm system on the LIFTX runs the LCS Folding Glide Propeller. When riders cut the throttle, the blades collapse flat against the hub, reducing the gap between them and the shroud. This creates a cleaner transition off throttle, reduces drag during glide, and makes pumping more efficient when riding unpowered.

The folding prop is one of the defining characteristics of the LIFTX. It allows the board to function as a true hybrid, using the motor to reach waves or build speed, then ride unpowered once on waves or wind bumps. Instead of dragging a fixed propeller through the water, the propulsion system gets out of the way and lets the foil do what it was designed to do. Lift also offers an alternative LCS Folding Power Propeller for larger riders or those who need more power. The larger blades and more aggressive pitch provide more thrust per revolution than the LCS Folding Glide Propeller, while still maintaining the folding feature.

Riders who have LIFT5 eFoils, and particularly the 4'4 model, have the option of swapping out the enclosed Jet Propeller for either of the folding options. This can be combined with either the 68mm propulsion system or the 55mm propulsion system, which are both compatible with the eBoxes on the LIFT5 and LIFTX eFoils.

Built Around the Lift Connect System

Lift’s various propulsion systems were designed to be interchangeable. Through the LCS, riders can swap propulsion systems in seconds without loose hardware or tools. If the desired riding style changes from long eFoil cruises to surf-oriented sessions, the propulsion can change with it instead of requiring a completely different setup. It is important to note that the 68mm propulsion system and the 55mm high-mount and low-mount propulsion systems are three separate options that come fully equipped with a mast, motor, and integrated nosecone. Propellers can be swapped between propulsion units, and there are a number of different options when it comes to them.

The Battery and Controller

In addition to the propulsion system, which generates thrust, the other factors involved in propelling an eFoil include the battery supplying the power and the controller the rider uses to activate the system..

Electric power comes from a lithium-ion battery stored inside the board. The Gen5 Full Range Battery on the LIFT5 carries 2.2 kWh and delivers up to 90 minutes of ride time. It is IP68-rated, double-walled, and sealed against the elements. There are no external cables. The battery drops in, clicks into place, and connects wirelessly to the eFoil system. One button starts everything.

Because the propulsion system is fully integrated with Lift's electronics and the LCS, changing propulsion setups doesn't require rewiring or engaging in complicated installation. Everything is designed to work together as one complete system, whether riding the standard 68mm propulsion or swapping to the 55mm for a different style of session. When swapping propulsion units, it is essential to power down the eFoil first. The eBox is only able to read the newly installed propulsion unit and calibrate the power output to it while booting up from an off status.

The LIFTX features a smaller, lighter-weight 1kWh battery that provides up to 45 minutes of powered riding. That number can be extended exponentially, however, since the LIFTX is designed for powered/unpowered riding. Expert riders who are doing long downwinding sessions on the LIFTX can theoretically ride for numerous hours without draining the 1 kWh battery completely.

With the system powered up, the only thing left for the rider to manage is speed and balance. Speed is a product of a number of factors, including the amount of thrust (informed by the hand controller), the foil setup being ridden, the weight of the rider and board, and the local conditions. Riders control their height above the water by shifting their weight. Leaning forward causes the foil to descend, while leaning back causes it to rise. Once riders are on foil, the hand controller manages throttle while the foil manages flight.

Frequently Asked Questions

Is an eFoil the same as a motorized surfboard?

No. A motorized surfboard sits on top of the water and uses electric power to move across the surface. An eFoil uses a hydrofoil wing beneath the board to rise entirely out of the water. Once on foil, the board itself has no contact with the surface, which is what makes the ride feel so different: no drag, no chop, and almost complete silence.

How fast does an eFoil go?

Speed depends on the wing, propulsion setup, and rider weight. Most recreational eFoil sessions feature speeds of between 12 and 25 mph. Advanced riders on performance wings push beyond that. 

How long does the battery last?

The Gen5 Full Range Battery on the LIFT5 provides up to 90 minutes of powered ride time with its 2.2 kWh capacity. The LIFTX 1 kWh battery provides up to 45 minutes of powered ride time. Battery life varies with rider weight, speed, water conditions, and how much time is spent at full throttle. Riding efficiently at moderate power extends sessions significantly.

Why Choose the 55mm Propulsion Unit Over the 68mm?

Both the 55mm and 68mm propulsion units have their place. Ultimately, it all depends on how you ride. The 68mm motor delivers more thrust and longer powered sessions, making it a great fit for riders focused primarily on eFoiling, cruising, and incremental progression. The 55mm system, on the other hand, was designed with hybrid riding in mind. Its compact profile, lighter weight, folding propeller, interchangeable mounting options, and reduced drag make it well suited to riders who want to blend powered take-offs with surf, swell, or downwind foiling.

Final Thoughts

Once riders understand how each component works together, it's easier to see why an eFoil feels so different from any other board sport. The board provides the platform, the battery supplies the power, the propulsion unit transfers that power to the prop, and the foil generates lift. On both the 68mm and 55mm setups, the direct drive propulsion system brings those technologies together with Quiet Ride Technology. Meanwhile, interchangeable LCS compatibility provides different options, including high- and low-mount configurations and a folding propeller that keeps the ride feeling smooth even after the motor is switched off. 

If you're curious about what riding an eFoil actually feels like or want to understand which propulsion setup best matches your riding style, Lift Foils has a full lineup of boards, propulsion options, and experienced riders ready to help you find the right fit.